UNC / UNF Thread Gauges to ASME B1.2
Manufacturer & exporter · Gauges to ASME B1.2, gage tolerance classes W and X
We make Unified inch thread gauges (UNC, UNF and UNEF) to ASME B1.2, in gage tolerance classes W and X, for customers in the USA and for Indian manufacturers supplying American programmes.
Gauges are made in OHNS tool steel, hardened and sub-zero treated, and calibrated in our NABL-accredited laboratory, which is recognised internationally through the ILAC Mutual Recognition Arrangement.
Typical uses: parts built to American drawings in automotive, oil and gas, aerospace and machinery.
At a glance
- Thread standard
- ASME B1.1 (Unified inch screw threads)
- Gauge standard
- ASME B1.2, gage tolerance classes W and X
- Thread form
- 60° Unified thread form, parallel
- Classes (internal / external)
- 2B, 3B / 2A, 3A
- Material
- OHNS tool steel, 60-62 HRC, sub-zero treated
- Certificate
- NABL (ISO/IEC 17025, CC-2472), ILAC MRA recognised
Gauges we supply
- GO / NOGO thread plug gauges for internal threads (2B, 3B)
- GO / NOGO thread ring gauges for external threads (2A, 3A)
- Gage tolerance class W or X, as specified
Unified (UNC / UNF) sizes
Common sizes below; other sizes and special threads are made to drawing.
Unified coarse (UNC)
| Size | TPI | Pitch (mm) | Major dia. (mm) | Major dia. (in) |
|---|---|---|---|---|
| #4-40 UNC | 40 | 0.635 | 2.845 | 0.112 |
| #6-32 UNC | 32 | 0.7938 | 3.505 | 0.138 |
| #8-32 UNC | 32 | 0.7938 | 4.166 | 0.164 |
| #10-24 UNC | 24 | 1.0583 | 4.826 | 0.19 |
| 1/4"-20 UNC | 20 | 1.27 | 6.35 | 0.25 |
| 5/16"-18 UNC | 18 | 1.4111 | 7.938 | 0.3125 |
| 3/8"-16 UNC | 16 | 1.5875 | 9.525 | 0.375 |
| 7/16"-14 UNC | 14 | 1.8143 | 11.112 | 0.4375 |
| 1/2"-13 UNC | 13 | 1.9538 | 12.7 | 0.5 |
| 9/16"-12 UNC | 12 | 2.1167 | 14.288 | 0.5625 |
| 5/8"-11 UNC | 11 | 2.3091 | 15.875 | 0.625 |
| 3/4"-10 UNC | 10 | 2.54 | 19.05 | 0.75 |
| 7/8"-9 UNC | 9 | 2.8222 | 22.225 | 0.875 |
| 1"-8 UNC | 8 | 3.175 | 25.4 | 1 |
| 1-1/8"-7 UNC | 7 | 3.6286 | 28.575 | 1.125 |
| 1-1/4"-7 UNC | 7 | 3.6286 | 31.75 | 1.25 |
| 1-1/2"-6 UNC | 6 | 4.2333 | 38.1 | 1.5 |
Unified fine (UNF)
| Size | TPI | Pitch (mm) | Major dia. (mm) | Major dia. (in) |
|---|---|---|---|---|
| #10-32 UNF | 32 | 0.7938 | 4.826 | 0.19 |
| 1/4"-28 UNF | 28 | 0.9071 | 6.35 | 0.25 |
| 5/16"-24 UNF | 24 | 1.0583 | 7.938 | 0.3125 |
| 3/8"-24 UNF | 24 | 1.0583 | 9.525 | 0.375 |
| 7/16"-20 UNF | 20 | 1.27 | 11.112 | 0.4375 |
| 1/2"-20 UNF | 20 | 1.27 | 12.7 | 0.5 |
| 9/16"-18 UNF | 18 | 1.4111 | 14.288 | 0.5625 |
| 5/8"-18 UNF | 18 | 1.4111 | 15.875 | 0.625 |
| 3/4"-16 UNF | 16 | 1.5875 | 19.05 | 0.75 |
| 7/8"-14 UNF | 14 | 1.8143 | 22.225 | 0.875 |
| 1"-12 UNF | 12 | 2.1167 | 25.4 | 1 |
| 1-1/4"-12 UNF | 12 | 2.1167 | 31.75 | 1.25 |
| 1-1/2"-12 UNF | 12 | 2.1167 | 38.1 | 1.5 |
Questions
What is the difference between gage class W and X?
Both are ASME B1.2 gage tolerance classes. Class W has the tighter gage tolerance and is used where the full product tolerance must be preserved; class X has a wider gage tolerance and is common for general production inspection. Specify the class on your order.
Are your UNC / UNF thread gauges supplied with a calibration certificate?
Yes. Every gauge is calibrated in our own NABL-accredited laboratory (ISO/IEC 17025:2017, certificate CC-2472) before dispatch. NABL is a signatory to the ILAC Mutual Recognition Arrangement, so the certificate is recognised by accreditation bodies in ILAC member economies.
Do you export thread gauges?
Yes. SV Nanometrology is a manufacturer and exporter of precision gauges and supplies customers outside India, including the USA and Europe. Send your drawing or thread designation and quantity for a quotation.
What material are the gauges made from?
Gauging members are made from OHNS tool steel, hardened to 60-62 HRC and sub-zero treated for wear resistance and dimensional stability.
Other standards: Metric (M) · NPT / NPTF · BSP (G / R) · ACME
Get a quote for Unified (UNC / UNF) thread gauges
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch