7/16"-20 UNF Thread Gauges
GO/NOGO thread plug and ring gauges · ASME B1.2, gage tolerance classes W and X · Manufacturer & exporter
We manufacture GO/NOGO thread gauges for the 7/16-20 UNF thread: thread plug gauges to check tapped holes and nuts, and thread ring gauges to check bolts, studs and screws. Gauges are made to ASME B1.2, gage tolerance classes W and X and supplied with a calibration certificate from our own NABL-accredited laboratory.
The GO member confirms the thread will assemble with its mating part; the NOGO member confirms the pitch diameter is within its limit. Together they give a fast accept or reject on the shop floor without measuring.
Need a different class, a pre-plating size or a left-hand thread? Tell us in the enquiry; special threads are made to drawing.
| Designation | 7/16-20 UNF |
|---|---|
| Series | Unified fine (UNF) |
| Threads per inch (TPI) | 20 |
| Pitch | 1.27 mm |
| Nominal major diameter | 11.112 mm (0.4375 in) |
| Thread form | 60° Unified thread form, parallel |
| Thread standard | ASME B1.1 (Unified inch screw threads) |
| Gauge standard | ASME B1.2, gage tolerance classes W and X |
| Plug gauge (internal thread) | GO / NOGO, class 2B or 3B |
| Ring gauge (external thread) | GO / NOGO, class 2A or 3A |
| Material | OHNS tool steel, 60-62 HRC, sub-zero treated |
| Certificate | NABL calibration certificate (ISO/IEC 17025, CC-2472) |
Pitch-diameter limits depend on the tolerance class and gauge standard and are stated on the calibration certificate.
Nearby Unified (UNC / UNF) sizes
Get a quote for 7/16"-20 UNF thread gauges
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch