NPT & NPTF Taper Pipe Thread Gauges

Manufacturer & exporter · Gauges to ASME B1.20.1 L1 gauging; ASME B1.20.5 for Dryseal NPTF

NPT and NPTF are the American taper pipe threads used on fittings, valves, hydraulic and pneumatic components. We manufacture L1 taper thread plug and ring gauges for NPT, and Dryseal NPTF gauges to ASME B1.20.5.

Taper and form are what make a pipe thread gauge reliable. Our grinding set-up holds taper and ovality under 1 micron, and every gauge is calibrated in our NABL-accredited laboratory before dispatch.

Typical uses: valves, fittings, hydraulics, pneumatics, oil and gas and process equipment.

At a glance

Thread standard
ASME B1.20.1 (NPT), ASME B1.20.3 (NPTF Dryseal)
Gauge standard
ASME B1.20.1 L1 gauging; ASME B1.20.5 for Dryseal NPTF
Thread form
60° thread on a 1 in 16 taper
Classes (internal / external)
NPT / NPTF internal / NPT / NPTF external
Material
OHNS tool steel, 60-62 HRC, sub-zero treated
Certificate
NABL (ISO/IEC 17025, CC-2472), ILAC MRA recognised

Gauges we supply

  • L1 taper thread plug gauges for internal pipe threads
  • L1 taper thread ring gauges for external pipe threads
  • NPTF Dryseal gauges to ASME B1.20.5

NPT / NPTF sizes

Common sizes below; other sizes and special threads are made to drawing. Major diameter shown is the outside diameter of the pipe.

SizeTPIPitch (mm)Major dia. (mm)Major dia. (in)
1/16"-27 NPT270.94077.940.3125
1/8"-27 NPT270.940710.290.405
1/4"-18 NPT181.411113.720.54
3/8"-18 NPT181.411117.150.675
1/2"-14 NPT141.814321.340.84
3/4"-14 NPT141.814326.671.05
1"-11.5 NPT11.52.208733.41.315
1-1/4"-11.5 NPT11.52.208742.161.66
1-1/2"-11.5 NPT11.52.208748.261.9
2"-11.5 NPT11.52.208760.332.375
2-1/2"-8 NPT83.17573.022.875
3"-8 NPT83.17588.93.5
4"-8 NPT83.175114.34.5

Questions

What is the difference between NPT and NPTF gauging?

NPT relies on sealant to seal, and is checked with L1 plug and ring gauges for hand-tight engagement. NPTF (Dryseal) seals by metal-to-metal contact at the crests and roots, so it needs additional gauging to ASME B1.20.5. Tell us which you need on the enquiry.

Are your NPT / NPTF thread gauges supplied with a calibration certificate?

Yes. Every gauge is calibrated in our own NABL-accredited laboratory (ISO/IEC 17025:2017, certificate CC-2472) before dispatch. NABL is a signatory to the ILAC Mutual Recognition Arrangement, so the certificate is recognised by accreditation bodies in ILAC member economies.

Do you export thread gauges?

Yes. SV Nanometrology is a manufacturer and exporter of precision gauges and supplies customers outside India, including the USA and Europe. Send your drawing or thread designation and quantity for a quotation.

What material are the gauges made from?

Gauging members are made from OHNS tool steel, hardened to 60-62 HRC and sub-zero treated for wear resistance and dimensional stability.

Other standards: Metric (M) · Unified (UNC / UNF) · BSP (G / R) · ACME

Get a quote for NPT / NPTF thread gauges

Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).

  • Manufacturer and exporter, supplying customers worldwide
  • Made to your drawing, standard or sample
  • Calibrated in-house before dispatch