ISO Metric Thread Gauges: GO/NOGO Plug & Ring
Manufacturer & exporter · Gauges to ISO 1502
ISO metric threads are the most widely used fastening threads in the world. We manufacture GO/NOGO thread plug and ring gauges for coarse and fine pitch metric threads to ISO 1502, from M2 upwards, in standard and special tolerance classes.
Each gauge is ground from OHNS tool steel, hardened and sub-zero treated, then calibrated in our in-house NABL-accredited laboratory before dispatch, so you receive the gauge and its accredited certificate together.
Typical uses: automotive, fasteners, hydraulics, general engineering and aerospace parts.
At a glance
- Thread standard
- ISO 68-1 (profile), ISO 261 (sizes), ISO 965-1 (tolerances)
- Gauge standard
- ISO 1502
- Thread form
- 60° symmetrical V thread, parallel
- Classes (internal / external)
- 6H (4H5H, 6G on request) / 6g (4h, 6e, 6h on request)
- Material
- OHNS tool steel, 60-62 HRC, sub-zero treated
- Certificate
- NABL (ISO/IEC 17025, CC-2472), ILAC MRA recognised
Gauges we supply
- GO / NOGO thread plug gauges for tapped holes and nuts
- GO / NOGO thread ring gauges for bolts, studs and screws
- Special classes and pre-plating sizes made to drawing
Metric (M) sizes
Common sizes below; other sizes and special threads are made to drawing.
ISO metric coarse pitch
| Size | Pitch (mm) | Major dia. (mm) | Major dia. (in) |
|---|---|---|---|
| M2 × 0.4 | 0.4 | 2 | 0.0787 |
| M2.5 × 0.45 | 0.45 | 2.5 | 0.0984 |
| M3 × 0.5 | 0.5 | 3 | 0.1181 |
| M4 × 0.7 | 0.7 | 4 | 0.1575 |
| M5 × 0.8 | 0.8 | 5 | 0.1969 |
| M6 × 1 | 1 | 6 | 0.2362 |
| M8 × 1.25 | 1.25 | 8 | 0.315 |
| M10 × 1.5 | 1.5 | 10 | 0.3937 |
| M12 × 1.75 | 1.75 | 12 | 0.4724 |
| M14 × 2 | 2 | 14 | 0.5512 |
| M16 × 2 | 2 | 16 | 0.6299 |
| M18 × 2.5 | 2.5 | 18 | 0.7087 |
| M20 × 2.5 | 2.5 | 20 | 0.7874 |
| M22 × 2.5 | 2.5 | 22 | 0.8661 |
| M24 × 3 | 3 | 24 | 0.9449 |
| M27 × 3 | 3 | 27 | 1.063 |
| M30 × 3.5 | 3.5 | 30 | 1.1811 |
| M33 × 3.5 | 3.5 | 33 | 1.2992 |
| M36 × 4 | 4 | 36 | 1.4173 |
| M42 × 4.5 | 4.5 | 42 | 1.6535 |
| M48 × 5 | 5 | 48 | 1.8898 |
| M56 × 5.5 | 5.5 | 56 | 2.2047 |
| M64 × 6 | 6 | 64 | 2.5197 |
ISO metric fine pitch
| Size | Pitch (mm) | Major dia. (mm) | Major dia. (in) |
|---|---|---|---|
| M8 × 1 | 1 | 8 | 0.315 |
| M10 × 1 | 1 | 10 | 0.3937 |
| M10 × 1.25 | 1.25 | 10 | 0.3937 |
| M12 × 1.25 | 1.25 | 12 | 0.4724 |
| M12 × 1.5 | 1.5 | 12 | 0.4724 |
| M14 × 1.5 | 1.5 | 14 | 0.5512 |
| M16 × 1.5 | 1.5 | 16 | 0.6299 |
| M18 × 1.5 | 1.5 | 18 | 0.7087 |
| M20 × 1.5 | 1.5 | 20 | 0.7874 |
| M22 × 1.5 | 1.5 | 22 | 0.8661 |
| M24 × 1.5 | 1.5 | 24 | 0.9449 |
| M24 × 2 | 2 | 24 | 0.9449 |
| M27 × 2 | 2 | 27 | 1.063 |
| M30 × 2 | 2 | 30 | 1.1811 |
Questions
Which tolerance class do I need for a metric thread gauge?
Most tapped holes are 6H and most bolts and studs are 6g, so a 6H thread plug gauge and a 6g thread ring gauge cover the majority of parts. Your drawing will state the class; we also make 4H5H, 6G, 4h, 6e and pre-plating sizes.
Are your metric thread gauges supplied with a calibration certificate?
Yes. Every gauge is calibrated in our own NABL-accredited laboratory (ISO/IEC 17025:2017, certificate CC-2472) before dispatch. NABL is a signatory to the ILAC Mutual Recognition Arrangement, so the certificate is recognised by accreditation bodies in ILAC member economies.
Do you export thread gauges?
Yes. SV Nanometrology is a manufacturer and exporter of precision gauges and supplies customers outside India, including the USA and Europe. Send your drawing or thread designation and quantity for a quotation.
What material are the gauges made from?
Gauging members are made from OHNS tool steel, hardened to 60-62 HRC and sub-zero treated for wear resistance and dimensional stability.
Other standards: Unified (UNC / UNF) · NPT / NPTF · BSP (G / R) · ACME
Get a quote for Metric (M) thread gauges
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch