BSP Thread Gauges: BSPP (G) & BSPT (R)
Manufacturer & exporter · Gauges to ISO 228-2 (parallel), ISO 7-2 (taper)
British Standard Pipe threads are used on pipes, fittings, valves and hydraulic components across Europe, India, the Middle East and Asia. We manufacture gauges for both parallel BSPP (G) threads to ISO 228 and BSPT pressure-tight threads to ISO 7 (R external taper, Rc internal taper, Rp internal parallel).
Every gauge is made from OHNS tool steel, hardened and sub-zero treated, and calibrated in our NABL-accredited laboratory before it is shipped.
Typical uses: pipes, fittings, valves, hydraulics, pneumatics and water and gas equipment.
At a glance
- Thread standard
- ISO 228-1 (parallel, G), ISO 7-1 / EN 10226-1 (taper, R / Rc / Rp)
- Gauge standard
- ISO 228-2 (parallel), ISO 7-2 (taper)
- Thread form
- 55° Whitworth form, parallel (G) or 1 in 16 taper (R)
- Classes (internal / external)
- G (parallel), Rc / Rp (taper) / G class A / B, R (taper)
- Material
- OHNS tool steel, 60-62 HRC, sub-zero treated
- Certificate
- NABL (ISO/IEC 17025, CC-2472), ILAC MRA recognised
Gauges we supply
- BSPP (G) parallel thread plug and ring gauges
- BSPT taper thread gauges: R (external taper), Rc (internal taper), Rp (internal parallel for use with R)
- Pre-plating and special sizes made to drawing
BSP (G / R) sizes
Common sizes below; other sizes and special threads are made to drawing.
| Size | TPI | Pitch (mm) | Major dia. (mm) | Major dia. (in) |
|---|---|---|---|---|
| 1/16" BSP (28 TPI) | 28 | 0.9071 | 7.723 | 0.3041 |
| 1/8" BSP (28 TPI) | 28 | 0.9071 | 9.728 | 0.383 |
| 1/4" BSP (19 TPI) | 19 | 1.3368 | 13.157 | 0.518 |
| 3/8" BSP (19 TPI) | 19 | 1.3368 | 16.662 | 0.656 |
| 1/2" BSP (14 TPI) | 14 | 1.8143 | 20.955 | 0.825 |
| 3/4" BSP (14 TPI) | 14 | 1.8143 | 26.441 | 1.041 |
| 1" BSP (11 TPI) | 11 | 2.3091 | 33.249 | 1.309 |
| 1-1/4" BSP (11 TPI) | 11 | 2.3091 | 41.91 | 1.65 |
| 1-1/2" BSP (11 TPI) | 11 | 2.3091 | 47.803 | 1.882 |
| 2" BSP (11 TPI) | 11 | 2.3091 | 59.614 | 2.347 |
| 2-1/2" BSP (11 TPI) | 11 | 2.3091 | 75.184 | 2.96 |
| 3" BSP (11 TPI) | 11 | 2.3091 | 87.884 | 3.46 |
| 4" BSP (11 TPI) | 11 | 2.3091 | 113.03 | 4.45 |
Questions
What is the difference between BSPP and BSPT?
BSPP (G) is a parallel thread to ISO 228 that seals with a washer or O-ring; BSPT to ISO 7 seals on the thread itself: R is the external taper thread, used with an Rc (taper) or Rp (parallel) internal thread. They use different gauges, so state which one your drawing calls for.
Are your BSP thread gauges supplied with a calibration certificate?
Yes. Every gauge is calibrated in our own NABL-accredited laboratory (ISO/IEC 17025:2017, certificate CC-2472) before dispatch. NABL is a signatory to the ILAC Mutual Recognition Arrangement, so the certificate is recognised by accreditation bodies in ILAC member economies.
Do you export thread gauges?
Yes. SV Nanometrology is a manufacturer and exporter of precision gauges and supplies customers outside India, including the USA and Europe. Send your drawing or thread designation and quantity for a quotation.
What material are the gauges made from?
Gauging members are made from OHNS tool steel, hardened to 60-62 HRC and sub-zero treated for wear resistance and dimensional stability.
Other standards: Metric (M) · Unified (UNC / UNF) · NPT / NPTF · ACME
Get a quote for BSP (G / R) thread gauges
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch