4" BSP (11 TPI) Thread Gauges
GO/NOGO thread plug and ring gauges · ISO 228-2 (parallel), ISO 7-2 (taper) · Manufacturer & exporter
We manufacture GO/NOGO thread gauges for the G 4 / R 4 thread: thread plug gauges to check tapped holes and nuts, and thread ring gauges to check bolts, studs and screws. Gauges are made to ISO 228-2 (parallel), ISO 7-2 (taper) and supplied with a calibration certificate from our own NABL-accredited laboratory.
The GO member confirms the thread will assemble with its mating part; the NOGO member confirms the pitch diameter is within its limit. Together they give a fast accept or reject on the shop floor without measuring.
Need a different class, a pre-plating size or a left-hand thread? Tell us in the enquiry; special threads are made to drawing.
| Designation | G 4 / R 4 |
|---|---|
| Series | British Standard Pipe (BSPP G / BSPT R) |
| Nominal size | 4" |
| Threads per inch (TPI) | 11 |
| Pitch | 2.3091 mm |
| Nominal major diameter | 113.03 mm (4.45 in) |
| Thread form | 55° Whitworth form, parallel (G) or 1 in 16 taper (R) |
| Thread standard | ISO 228-1 (parallel, G), ISO 7-1 / EN 10226-1 (taper, R / Rc / Rp) |
| Gauge standard | ISO 228-2 (parallel), ISO 7-2 (taper) |
| Plug gauge (internal thread) | GO / NOGO, class G or Rc / Rp |
| Ring gauge (external thread) | GO / NOGO, class G (class A or B) or R |
| Material | OHNS tool steel, 60-62 HRC, sub-zero treated |
| Certificate | NABL calibration certificate (ISO/IEC 17025, CC-2472) |
Pitch-diameter limits depend on the tolerance class and gauge standard and are stated on the calibration certificate.
Nearby BSP (G / R) sizes
Get a quote for 4" BSP (11 TPI) thread gauges
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch