2-1/2" BSP (11 TPI) Thread Gauges

GO/NOGO thread plug and ring gauges · ISO 228-2 (parallel), ISO 7-2 (taper) · Manufacturer & exporter

We manufacture GO/NOGO thread gauges for the G 2-1/2 / R 2-1/2 thread: thread plug gauges to check tapped holes and nuts, and thread ring gauges to check bolts, studs and screws. Gauges are made to ISO 228-2 (parallel), ISO 7-2 (taper) and supplied with a calibration certificate from our own NABL-accredited laboratory.

The GO member confirms the thread will assemble with its mating part; the NOGO member confirms the pitch diameter is within its limit. Together they give a fast accept or reject on the shop floor without measuring.

Need a different class, a pre-plating size or a left-hand thread? Tell us in the enquiry; special threads are made to drawing.

2-1/2" BSP (11 TPI) at a glance
DesignationG 2-1/2 / R 2-1/2
SeriesBritish Standard Pipe (BSPP G / BSPT R)
Nominal size2-1/2"
Threads per inch (TPI)11
Pitch2.3091 mm
Nominal major diameter75.184 mm (2.96 in)
Thread form55° Whitworth form, parallel (G) or 1 in 16 taper (R)
Thread standardISO 228-1 (parallel, G), ISO 7-1 / EN 10226-1 (taper, R / Rc / Rp)
Gauge standardISO 228-2 (parallel), ISO 7-2 (taper)
Plug gauge (internal thread)GO / NOGO, class G or Rc / Rp
Ring gauge (external thread)GO / NOGO, class G (class A or B) or R
MaterialOHNS tool steel, 60-62 HRC, sub-zero treated
CertificateNABL calibration certificate (ISO/IEC 17025, CC-2472)

Pitch-diameter limits depend on the tolerance class and gauge standard and are stated on the calibration certificate.

Nearby BSP (G / R) sizes

Get a quote for 2-1/2" BSP (11 TPI) thread gauges

Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).

  • Manufacturer and exporter, supplying customers worldwide
  • Made to your drawing, standard or sample
  • Calibrated in-house before dispatch