1/2"-14 NPT Thread Gauges

GO/NOGO thread plug and ring gauges · ASME B1.20.1 L1 gauging; ASME B1.20.5 for Dryseal NPTF · Manufacturer & exporter

We manufacture GO/NOGO thread gauges for the 1/2-14 NPT thread: thread plug gauges to check tapped holes and nuts, and thread ring gauges to check bolts, studs and screws. Gauges are made to ASME B1.20.1 L1 gauging; ASME B1.20.5 for Dryseal NPTF and supplied with a calibration certificate from our own NABL-accredited laboratory.

The GO member confirms the thread will assemble with its mating part; the NOGO member confirms the pitch diameter is within its limit. Together they give a fast accept or reject on the shop floor without measuring.

Need a different class, a pre-plating size or a left-hand thread? Tell us in the enquiry; special threads are made to drawing.

1/2"-14 NPT at a glance
Designation1/2-14 NPT
SeriesAmerican taper pipe thread (NPT / NPTF)
Nominal size1/2"
Threads per inch (TPI)14
Pitch1.8143 mm
Pipe outside diameter21.34 mm (0.84 in)
Thread form60° thread on a 1 in 16 taper
Thread standardASME B1.20.1 (NPT), ASME B1.20.3 (NPTF Dryseal)
Gauge standardASME B1.20.1 L1 gauging; ASME B1.20.5 for Dryseal NPTF
Plug gauge (internal thread)GO / NOGO, class NPT / NPTF internal
Ring gauge (external thread)GO / NOGO, class NPT / NPTF external
MaterialOHNS tool steel, 60-62 HRC, sub-zero treated
CertificateNABL calibration certificate (ISO/IEC 17025, CC-2472)

Pitch-diameter limits depend on the tolerance class and gauge standard and are stated on the calibration certificate.

Nearby NPT / NPTF sizes

Get a quote for 1/2"-14 NPT thread gauges

Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).

  • Manufacturer and exporter, supplying customers worldwide
  • Made to your drawing, standard or sample
  • Calibrated in-house before dispatch