#6-32 UNC Thread Gauges

GO/NOGO thread plug and ring gauges · ASME B1.2, gage tolerance classes W and X · Manufacturer & exporter

We manufacture GO/NOGO thread gauges for the #6-32 UNC thread: thread plug gauges to check tapped holes and nuts, and thread ring gauges to check bolts, studs and screws. Gauges are made to ASME B1.2, gage tolerance classes W and X and supplied with a calibration certificate from our own NABL-accredited laboratory.

The GO member confirms the thread will assemble with its mating part; the NOGO member confirms the pitch diameter is within its limit. Together they give a fast accept or reject on the shop floor without measuring.

Need a different class, a pre-plating size or a left-hand thread? Tell us in the enquiry; special threads are made to drawing.

#6-32 UNC at a glance
Designation#6-32 UNC
SeriesUnified coarse (UNC)
Threads per inch (TPI)32
Pitch0.7938 mm
Nominal major diameter3.505 mm (0.138 in)
Thread form60° Unified thread form, parallel
Thread standardASME B1.1 (Unified inch screw threads)
Gauge standardASME B1.2, gage tolerance classes W and X
Plug gauge (internal thread)GO / NOGO, class 2B or 3B
Ring gauge (external thread)GO / NOGO, class 2A or 3A
MaterialOHNS tool steel, 60-62 HRC, sub-zero treated
CertificateNABL calibration certificate (ISO/IEC 17025, CC-2472)

Pitch-diameter limits depend on the tolerance class and gauge standard and are stated on the calibration certificate.

Nearby Unified (UNC / UNF) sizes

Get a quote for #6-32 UNC thread gauges

Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).

  • Manufacturer and exporter, supplying customers worldwide
  • Made to your drawing, standard or sample
  • Calibrated in-house before dispatch