: Surface Plate Calibration: Why Flatness Matters

Every height and flatness measurement starts from the surface plate. Learn why its flatness is checked, what wears it, and how often it should be calibrated.

21 November 2026 SV Nanometrology

A surface plate is the flat base on which parts and instruments are placed for inspection. Height gauges, dial indicators and other tools all assume that the plate is perfectly flat. If the plate is not flat, every measurement taken on it carries the same error.

Plates wear in the places where they are used the most, usually in the middle. Granite and cast iron plates can also be damaged by dropped tools, dirt and rough handling. Because the wear is slow and is not visible by eye, only a calibration can show how flat the plate really is.

During calibration, the lab measures the flatness over the whole surface and also checks the local flatness in small areas. The certificate shows the flatness error and the grade the plate meets. If the error is too large, the plate can be lapped again to bring it back to grade.

Surface plates are heavy and cannot be moved easily, so they are often calibrated at your site. S.V. Nanometrology provides on-site calibration within its NABL-accredited scope.

Ask us about Calibration services

Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).

  • Manufacturer and exporter, supplying customers worldwide
  • Made to your drawing, standard or sample
  • Calibrated in-house before dispatch