Micrometer Calibration: What Is Checked and How Often

A micrometer is only as good as its last calibration. See what is checked during micrometer calibration, and how to decide the calibration gap for your shop.

17 November 2026

Micrometers are used every day in workshops, so they drift with use. During calibration, a lab checks several things. The accuracy of the reading is checked at many points along the range using gauge blocks. The flatness of the measuring faces and the parallelism between them are checked, and the zero error is also noted.

The lab also checks the condition of the thimble, the ratchet and the lock, because a rough feel or a loose spindle can change the reading from one person to another. The final certificate shows the error at each point and the uncertainty of the calibration.

How often should you calibrate? For daily use, six to twelve months is common. Micrometers that measure tight tolerances or are used by many operators may need a shorter gap. Always check the zero with a standard before use, and calibrate right away after a drop.

S.V. Nanometrology calibrates micrometers of many types and ranges in its NABL-accredited laboratory. Send your instruments, or ask us about on-site calibration, at info@svnanometrology.com or +91 98732 67048.

Ask us about Calibration services

Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).

  • Manufacturer and exporter, supplying customers worldwide
  • Made to your drawing, standard or sample
  • Calibrated in-house before dispatch