How Temperature Affects Dimensional Measurement
A part measured warm will read bigger than the same part measured cold. Learn why 20 degrees Celsius is the standard measuring temperature, and how to avoid temperature errors.
Metals grow when they get warm and shrink when they cool. The change is small, but in precision work it is large enough to matter. A steel part that is 100 mm long grows by about one micron for every degree Celsius it gets warmer. If the tolerance is only a few microns, a few degrees of temperature difference can decide pass or fail.
To make measurements comparable all over the world, the standard reference temperature for dimensional measurement is 20 degrees Celsius. Gauges are calibrated at this temperature, and parts should ideally be measured at it as well.
In the workshop you can reduce temperature errors with simple habits. Let the part rest near the measuring instrument until both reach the same temperature, especially after machining or washing. Do not hold the part or the gauge in your hand for long, and keep the instrument away from sunlight, machines and air conditioner vents. Use the same material for the master and the part when possible, because then both change size by a similar amount.
Our NABL-accredited laboratory keeps temperature under control during calibration, so the uncertainty stays low. To know more about the right conditions for your measurements, write to info@svnanometrology.com or call +91 98732 67048.
Ask us about Calibration services
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch