Gauge Block Calibration: Why Grades K, 0, 1 and 2 Matter
Gauge blocks are the reference of the shop floor. Understand what the grades K, 0, 1 and 2 mean, and how often they should be calibrated to stay reliable.
Gauge blocks, also called slip gauges, are the most common length standards in a workshop. They are used to set micrometers, comparators and height gauges, and to check other gauges. Because so many instruments depend on them, their accuracy is very important.
Gauge blocks are made in grades. Grade K is the most accurate and is used as a calibration reference. Grade 0 is used in inspection rooms and tool rooms. Grade 1 is used on the shop floor for general inspection, and grade 2 is used for workshop setting jobs. A higher grade has a smaller allowed error in length, and it also costs more.
Gauge blocks wear at the edges and the faces, and a block that is dropped or rubbed with dirt can change its size. Regular calibration finds this wear. The calibration checks the length of each block and also its flatness and parallelism, and the certificate shows how much each block has deviated from its nominal size.
As a rule, use a higher grade set for reference and a lower grade set for daily work, so the reference set wears very little. S.V. Nanometrology calibrates gauge blocks in its NABL-accredited laboratory with very small uncertainty.
Ask us about Calibration services
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch