Dial Indicator Calibration Explained in Simple Words

Dial indicators and dial gauges are used for runout, alignment and comparison. See how they are calibrated, what errors are checked, and why regular calibration matters.

19 November 2026 S V Nanometrology

Dial indicators are used to check runout, flatness, alignment and small differences in size. Inside the dial is a set of gears that turn a small movement of the plunger into a large movement of the pointer, and these gears can wear or get dirty over time.

During calibration, the plunger is moved by known steps using a calibrated tester, and the lab notes the pointer reading at each step. It checks the error over the full range, the repeatability, and the hysteresis, which is the difference between the reading going up and the reading coming down. A good dial indicator gives the same reading each time and moves smoothly.

The result is a table that shows the error at each point, so you know how much you can trust the reading in each part of the range. An indicator with a large error should be repaired or replaced.

The lab also checks whether the plunger moves freely, whether the dial is loose, and whether the contact point is worn. S.V. Nanometrology calibrates dial indicators and dial gauges in its NABL-accredited laboratory using a dial calibration tester.

Ask us about Calibration services

Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).

  • Manufacturer and exporter, supplying customers worldwide
  • Made to your drawing, standard or sample
  • Calibrated in-house before dispatch