What Is Measurement Uncertainty? A Simple Guide for Shop Floor Teams
No measurement is perfectly exact. Measurement uncertainty tells you how much doubt is left in a reading. Here is a simple explanation for engineers and inspectors, without difficult maths.
When you measure a shaft and the reading is 20.000 mm, it does not mean the shaft is exactly 20.000 mm. Every measurement has a small doubt around it, because of the instrument, the reference standard, the temperature, the method and even the person measuring. This small doubt is called measurement uncertainty, and it is written on every NABL calibration certificate.
Think of it as a small safety zone around the reading. If a certificate says a gauge is 20.0005 mm with an uncertainty of 0.0003 mm, the true size most likely lies between 20.0002 and 20.0008 mm. Usually this is reported at about 95 percent confidence, which means the true value lies inside that zone in almost every case.
This matters in daily inspection. If a part is very close to the tolerance limit, the uncertainty of your measurement can decide whether the part is accepted or rejected. That is why a lab with a smaller uncertainty, also called a better CMC, gives you more confidence. A common rule is that the uncertainty of the instrument should be a small fraction of the part tolerance, often one tenth or less.
S.V. Nanometrology calibrates gauges and precision instruments with very small uncertainties in its NABL-accredited laboratory, and the manufacturing unit is under the same roof. You can see the uncertainty for each instrument in our scope. To get a copy or to discuss the accuracy you need, write to info@svnanometrology.com.
Ask us about Thread gauges
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch