Thread Ring Gauges: How to Check External Threads Correctly
A thread ring gauge checks bolts, studs and other external threads quickly. Learn how to use the go and no-go rings the right way, and the mistakes that give wrong results.
A thread ring gauge is used to check external threads like bolts, studs and screws. It comes as a pair. The go ring must screw on to the thread freely by hand, and the no-go ring must not go on more than a turn or two. If both conditions are met, the thread is within its tolerance.
Before checking, clean the thread and remove burrs, oil and chips. Start the gauge straight and turn it gently. Never force a ring gauge on a thread, because force can damage both the part and the gauge. If the go ring does not enter, the thread is too large or has a form error. If the no-go ring goes on fully, the thread is too small.
A thread ring gauge only gives a pass or fail answer for the full thread form, so it is the fastest way to check a thread on the shop floor. For setting or checking the ring gauge itself, a thread setting plug is used, and the ring should be calibrated regularly because the thread flanks wear with use.
S.V. Nanometrology manufactures thread ring gauges and calibrates them in its NABL-accredited laboratory under one roof, so your gauge arrives with its certificate.
Ask us about Thread gauges
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch