Metric, UNC, BSP and NPT Threads: Key Differences for Gauge Buyers

Not all threads are the same. See the main differences between Metric, UNC, BSP and NPT threads, so you order the right thread gauge for your job.

11 November 2026 S V Nanometrology

The thread form decides which gauge you need, so it is important to know the common types. Metric threads, written as M10 x 1.5, use millimetres for the size and the pitch, and they have a 60 degree thread angle. They are the most common in India and in most of the world.

UNC and UNF are unified threads, which come from the inch system. They also have a 60 degree angle, but the size is in inches and the pitch is given as threads per inch. UNC means coarse and UNF means fine. These are often seen on imported machines and equipment.

BSP and NPT are pipe threads. BSP is the British standard and has a 55 degree angle. NPT is the American standard and has a 60 degree angle. Pipe threads are often tapered, so they are checked with special taper thread gauges, and a mix-up between BSP and NPT can cause leaks even though they look alike.

When you order, always write the thread form, size, pitch or threads per inch, and the tolerance class. If you are not sure, send a sample or a drawing. S.V. Nanometrology makes thread gauges in many forms and calibrates them in its own NABL-accredited lab.

Ask us about Thread gauges

Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).

  • Manufacturer and exporter, supplying customers worldwide
  • Made to your drawing, standard or sample
  • Calibrated in-house before dispatch