Contact Gauging vs Air Gauging: Which One Should You Use?
Should you check a bore with a go/no-go plug gauge or an air gauge? See how both methods compare on speed, accuracy, surface damage and cost, and how S.V. Nanometrology makes and calibrates both under one roof.
Two ways to check a bore
A bore can be checked in two common ways. A go/no-go plug gauge is a hard gauge that physically enters the hole, and it tells you quickly if the hole is within limits. An air gauge sends a thin stream of air through a small nozzle, and the change in air pressure shows the size of the hole. Nothing touches the wall of the bore.
Plug gauges: simple and low cost
A plug gauge is simple, low in cost and easy for any operator to use, so it is a good fit for general tolerances where a pass or fail answer is enough. Its limits are that it does not show the actual size, and it slowly wears and can mark soft materials like aluminium.
Air gauges: real size, taper and ovality
An air gauge shows the real size on a scale or digital display, so you can see the process drifting before parts go out of tolerance. It is also very good at showing shape errors like taper and ovality, and it does not scratch the surface. It costs more at the start and needs clean, dry air, but for tight tolerances and high volume work it often pays back quickly.
Which one should you use?
As a thumb rule, use plug gauges when you need a simple and low cost check, and use air gauges when tolerances are tight, the material is soft, or you want to track the process. S.V. Nanometrology manufactures plug gauges, ring gauges, air plug gauges and air gauge units, and calibrates them in its own NABL-accredited laboratory, so you can buy the gauge and its calibration from one place. Send your drawing to info@svnanometrology.com or call +91 98732 67048 for guidance.
Ask us about Air gauges
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch