Air Gauge for Bore Measurement
Air Gauging Systems · Manufacturer & exporter · NABL calibrated
An air plug gauge is the fastest way to measure a precision bore. The plug enters the bore, two or more air jets face the bore wall, and the air gauge unit shows the actual diameter in microns, not just a pass or fail.
Because nothing touches the bore, there is no marking of finished surfaces and no wear on the gauge, and two operators get the same reading. That makes air plug gauges the standard choice for bores in engine, transmission, hydraulic and fuel-system components.
| Measurement | Bore diameter, ovality, taper, straightness |
|---|---|
| Contact | Non-contact (air jets) |
| Setting | 2 master setting rings, calibrated on LMM to 0.1 µm |
| Readout | Digital (1-32 channels, SPC), column or dial unit |
| Certificate | NABL (ISO/IEC 17025, CC-2472) |
What an air plug gauge tells you
- Actual bore diameter, read directly in microns
- Ovality, by rotating a two-jet plug or using a multi-jet head
- Taper, by comparing jets at two depths
- Straightness and bell-mouth, with jets at several levels
What you receive
- Air plug gauge made to your bore drawing (single-jet or multi-jet)
- Two master setting rings at the limits of the measuring range
- Digital, column or dial air gauge unit, or connection to your existing unit
- NABL calibration certificates for the gauge and masters
Related products
Supplied with a calibration certificate from our own NABL-accredited laboratory (ISO/IEC 17025:2017, CC-2472). NABL is a signatory to the ILAC Mutual Recognition Arrangement, so the certificate is recognised internationally.
Questions
What do you need to quote an air plug gauge?
The component drawing showing the bore diameter and tolerance, bore depth, any blind-bore or cross-hole details, and which features you want measured (diameter only, or ovality and taper too). Tell us whether you need a readout unit or will use an existing one.
Can one air plug check several diameters?
Yes. Multi-jet and stepped air plugs can measure several diameters or depths in one insertion, each on its own channel of a multi-channel digital unit.
More air gauging applications
Get a quote: air gauge for bore measurement
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch