What Is a Master Setting Gauge and Why Does Every Shop Need One?

A master setting gauge is the reference your air gauges and bore gauges are set against. Learn what master plug and master ring gauges do, why their accuracy matters, and how S.V. Nanometrology makes and calibrates them under one roof.

29 October 2026 S V Nanometrology

Every measuring instrument needs something to compare against. When you use an air gauge, a bore gauge or a comparator, the instrument does not know the true size by itself. It is first set to zero on a master setting gauge, and every reading after that is taken from this reference. If the master is wrong, every part you measure will be wrong by the same amount, even if the instrument itself is perfect.

A master plug gauge is used to set instruments that measure internal sizes like bores and holes. A master ring gauge is used to set instruments that measure external sizes like shafts and pins. Both are made with a very fine surface finish and a very small size tolerance, because they must be much more accurate than the instrument they are setting. A good thumb rule is that the master should be at least ten times more accurate than the part tolerance you want to measure.

Masters also wear and change size over time, just like any other gauge. A master that is used every day to set air gauges needs regular calibration, and it should be stored carefully, clean and oiled, away from knocks and rust. Many shops keep one working master for daily use and one reference master that is used only for checking, so the reference stays in good condition for longer.

At S.V. Nanometrology we manufacture master plug gauges and master ring gauges, and we calibrate them in our own NABL-accredited laboratory under one roof. You get the master and its calibration certificate together, with no need to send it to a second lab. To discuss the size and accuracy you need, send your requirement to info@svnanometrology.com or call +91 98732 67048.

Ask us about Master gauges

Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).

  • Manufacturer and exporter, supplying customers worldwide
  • Made to your drawing, standard or sample
  • Calibrated in-house before dispatch