Taper Plug and Ring Gauges: How to Check a Taper Fit Correctly
A taper needs the right angle, the right size and the right contact. Learn how taper plug and ring gauges are used, what mistakes to avoid, and why accurate taper manufacturing matters.
A taper is not checked like a straight hole. Along with the size, the angle of the taper must also be correct, and the two parts must touch each other properly along their length. A taper plug gauge is used to check an internal taper, and a taper ring gauge is used to check an external taper.
There are two things to check. The first is the contact. A thin coat of marking blue is put on the gauge, the gauge is pushed gently into the part and turned a little, and then removed. The marks show how well the surfaces touch. Even contact along the full length means the angle is good. The second is the size, which is checked by seeing how far the gauge goes in, or by looking at the step marks on the gauge.
Some common mistakes spoil the result. Dirt or burrs on the part, too much force, a dirty gauge, and measuring when the part is still warm from machining can all give a wrong reading. Clean both surfaces and let the part come to room temperature first.
Accuracy of the gauge itself is just as important, because a wrong taper gauge will accept wrong parts. At S.V. Nanometrology we manufacture taper plug and ring gauges on machines that hold taper and ovality to about 0.8 microns, and we calibrate them in our own NABL-accredited laboratory under one roof. Send your taper details or drawing to info@svnanometrology.com or call +91 98732 67048.
Ask us about Taper gauges
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch