Custom Depth, Width and Flush-Pin Gauges: When Standard Gauges Are Not Enough
Not every feature can be checked with a standard gauge. See how custom depth, width and flush-pin gauges made from your drawing give a fast and reliable check on the shop floor.
Standard gauges cover common holes and threads, but many components have features that no ready-made gauge can check. A slot may need a fixed width check, a step may need a depth check, and a pin or a rivet may need to sit exactly flush with a surface. For these jobs, a custom gauge made to your drawing is the simplest and fastest answer.
A width gauge checks the size of a slot or a groove with a go and no-go pair. A depth gauge checks how deep a step, pocket or recess is, and it shows quickly if the depth is within limits. A flush-pin gauge checks the height of a pin or a part compared to a surface, so you can tell at a glance if it is flush, high or low.
The biggest benefit is speed. An operator does not need to read a scale or do any calculation. The gauge itself gives the answer, so the check takes only a few seconds and gives the same result with every operator. This is useful in high volume production where measuring each part with a vernier or a height gauge would slow the line.
To make a custom gauge we need your component drawing, the feature to be checked, and the tolerance. S.V. Nanometrology designs and manufactures these gauges and calibrates them in its NABL-accredited laboratory under one roof, so you get the gauge and its certificate together. Send your drawing to info@svnanometrology.com or call +91 98732 67048.
Ask us about Custom / special gauges
Send your drawing or specification and we will reply with a quotation, usually within one working day. Every gauge is supplied with a calibration certificate from our NABL-accredited lab (ISO/IEC 17025, CC-2472).
- Manufacturer and exporter, supplying customers worldwide
- Made to your drawing, standard or sample
- Calibrated in-house before dispatch